RCm BIT 391CB - Filling the Tank

Fig. 10
1
2
EN
EN-14
8.1 FILLING THE TANK
(Fig. 10)
WARNING:
Only add clean mains water to the tank at
a temperature no greater than 50°C.
- Usingahose(1)connectedtotap,llup
the tank (2) with water.
- Pour the liquid detergent into the tank.
N.B.:
Use non-foamy detergents only. For the
quantities, follow the instructions provided by
the detergent manufacturer according to the
type of dirt.
DANGER:
If the detergent comes in contact with the
eyes and/or skin or if swallowed, refer to
the use and safety information booklet
provided by the manufacturer of the de-
tergent.