LIFTLOG 1000 – INSTALLATION AND CALIBRATION
24
3.3 Technician Level Settings
Select then to access the Technician Level Menu (default PIN = 4084).
3.3.1 Home Screen Functions
Select the functions that you wish to appear on the main
operating screen.
3.3.2 Logging Options
Setup for logging output to any of the following:
Printer - (RDS ICP 300 printer or other printer)
Data - (CSV output to modem / datalogger)
SD – (CSV output to SD card)
USB – (CSV output to USB stick)
NOTE: All logging options can be set to operate simultaneously.
To Next Page
Loading...