REA VERIFIER
© REA Elektronik GmbH, 64367 Mühltal, Germany --- REA MLV-2D Manual Version 3 – 21/12/2015
Page 62 of 98
03) The "reflectance margin" value is too low
04) Finder pattern damage (FPD) is too high
Warnings:
01) Value for contrast uniformity is too small, measured: 6%, min.: 40%
Grade selected: 2.5 (B)
SRP grade: 0.0 (F)
Decode 4
Symbol contrast: 82% min. 55% 4
Unused error correction (UEC): 80% min. 50% 4
Modulation: 1
Axial non-uniformity (AN): 0% max. 8% 4
Grid non-uniformity (GN): 6% max. 50% 4
Fixed pattern damage (FPD): 2
LLS: 3
BLS: 4
LQZ: 4
BQZ: 2
Finder and timing pattern: 3
Reflectance margin: 1
Contrast uniformity (CU): 6% min. 40%
Print growth: 69µm
Print growth X: 35µm
Extreme value of Print growth X: min. -4µm, max. 90µm
Print growth Y: 110µm
Extreme value of Print growth Y: min. 44µm, max. 174µm
Optional parameters :
Module size: 457µm 254µm/615µm
Pixel per module: 11,8 min. 5
Module size X
437
Module size Y: 477
ECC code words :
45 244 5 126 134 208 164 188 76 19 97 250 238 196 244 179 254 80 73 174
Symbol properties:
Matrix size 22 x 22
Rmax 84.0% (X: 384, Y: 20)
Rmin 2.0% (X: 179, Y: 161)
Total code words 50
Data code words 30
Error correction code words 20
Error correction codes budget 10
Errors corrected 2
Unused error correction capacity 8
Errors corrected for data modules
2
Correctable errors for data modules from 10 to 80
Total (correct, erroneous) pad characters 2 (2, 0)
To Next Page
Loading...
Need help?
General
