76 | Grandview® G800EC Gas Fireplace
operating instructions
Battery Backup
To operate the stove during a power outage or when power is
not available see the following steps.
Diagram 1
2 Phillips head screws
1. Remove 2 Phillips head screws to remove cover plate. Place
screws to the side. Cover plate may not be exactly as shown.
See Diagram 1.
Diagram 2
Battery compartment door
Battery compartment tabs
2. Press down on both tabs to remove battery compartment
door. See diagrams 2 and 3.
Diagram 4
Diagram 3
Battery door removed
3. Install 4 AA batteries ensuring the polarity is correct.
See Diagram 4.
4. Reverse steps 3-1.
To Next Page
Loading...
