EasyManua.ls Logo

Rem GrainVac VR12 - 2.4. Safety Decals

Rem GrainVac VR12
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. SAFETY REM - GRAINVAC VR12
2.9. S
AFETY DECALS
14 9000-00-0042 R3
When replacing worn tires, make sure they meet the original tire specifications.
Never undersize the replacement tire.
DO NOT weld to the tire rim with the tire mounted on the rim. This action may cause
an explosion which could result in serious injury or death.
Inflate tires to the manufacturer’s recommended pressure.
Tires should not be operated at speeds higher than their rated
speed.
Keep wheel lug nuts tightened to manufacturer’s recommendations.
Never reinflate a tire that has been run flat or seriously under-inflated
without removing the tire from the wheel. Have the tire and wheel closely inspected
for damage before remounting.
2.9. Safety Decals
Keep safety decals clean and legible at all times.
Replace safety decals that are missing or have become illegible. See decal location
figures that follow.
Replaced parts must display the same decal(s) as the original part.
Replacement safety decals are available free of charge from your distributor,
dealer, or factory.
2.9.1. Decal Installation/Replacement
1. Decal area must be clean and dry, with a temperature above 50°F (10°C).
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion with the
exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining portion of
the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign backing
paper.
2.9.2. Safety Decal Locations and Details
Replicas of the safety decals that are attached to the equipment and their messages are
shown in the figure(s) that follow. Safe operation of the equipment requires that you
familiarize yourself with the various safety decals and the areas or particular functions
that the decals apply to, as well as the safety precautions that must be taken to avoid
serious injury, death, or damage.
REM reserves the right to update safety decals without notice. Safety decals may not be
exactly as shown.

Table of Contents