EasyManua.ls Logo

Rem GrainVac VR12 - Page 17

Rem GrainVac VR12
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REM - GRAINVAC VR12 2. SAFETY
2.9. SAFETY DECALS
9000-00-0042 R3 17
Figure 2.4 Safety Decal Locations - Rear View
WARNING
ENTANGLEMENT HAZARD
To prevent serious injury or death:
Keep body, hair, and clothing away from rotating
pulleys, belts, chains, and sprockets.
Do not operate with any guard removed or
modified. Keep guards in good working order.
Shut off and remove key or lock out power source
before inspecting or servicing machine.
Made in Canada
P1513002
PART #: P1513036
PART #: P1513100
PART #: P1513002
PART #: P1513134
PART #: P1513133
PART #: P1513105
100 HOURS
P1513100
Made in Canada
CAUTION
Rotor and exhaust are very hot. Do
not touch or service during operation
until rotor and exhaust surfaces have
been allowed to cool. Failure to do so
may result in burns.
P1513105Made in Canada
SAFETY INSTRUCTION
ROTOR INSPECTION
Inspection for rotor wear must be completed
upon first 40 hours of operation and every
40 hours after initial inspection. Refer to
operator’s manual for proper inspection
procedure.
P1513133
Made in Canada
WARNING
REGULAR SERVICE REMINDER
Components under the cover require regular
service. Neglecting to do so may cause bodily
harm or excessive wear to machine parts.
Refer to owners manual for service instructions.
P1513134
Made in Canada

Table of Contents