REM - GRAINVAC VR12 2. SAFETY
2.9. SAFETY DECALS
9000-00-0042 R3 19
Figure 2.6 Safety Decal Locations - Inlet Side View
PART #: P1513102
PART #: P1513016
PART #: P1513112
PART #: P1513108
O
P
E
N
C
L
O
S
E
D
TOWARDS
INLET SIDE
P
1
5
1
3
1
0
2
DANGER
SUFFOCATION HAZARD
• Follow safety precautions in equipment operator’s manual, and
know the recommended emergency procedure.
• Station an observer nearby who can communicate with both
the person in the bin and another individual to shut down
operating equipment in an emergency. To avoid anyone else
from becoming entrapped in the grain, the bin should not be
entered until it is safe.
• Grain vacuum operators should be very cautious when working
with grain that will not flow, sticks together or has spoiled.
• Grain vacuum operators should move the vacuum intake
frequently to avoid formation of a cone depression, keeping the
grain surface level working from the outside wall and moving
inward, thereby reducing the risk of engulfment.
P1513109
Made in Canada
CAUTION
Hearing
protection
required
during
operation.
Made in Canada
P1513103
DANGER
HIGH SUCTION/ROTATING PARTS
To prevent being pulled involuntarily into rotating blower and/
or auger:
• Keep clothing and yourself well clear and others away from
all open inlet and discharge area
• Never open or close inspection doors unless grain vac has
been shut off and all moving parts have stopped completely
Failure to heed this warning may result in serious injury,
dismemberment, or death.
P1513108
Made in Canada
DANGER
ROTATING FLIGHTING HAZARD
To prevent death or serious injury:
• KEEP AWAY from rotating auger flighting.
• DO NOT remove or modify auger flighting guards,
doors, or covers. Keep in good working order. Have
replaced if damaged.
• DO NOT operate the auger without all guards, doors,
and covers in place.
• NEVER touch the auger flighting. Use a stick or other
tool to remove an obstruction or clean out.
• Shut off and lock out power to adjust, service, or clean.
Made in Canada
P1513016
PART #:
P1513103
PART #: P1513109
WARNING
TIPPING HAZARD
Place jack to the location shown, for added
stability while in use, or GrainVac may tip
over during use. See Operator’s Manual for
more details.
P1513112
Made in Canada
To Next Page
Loading...