CAUTION
• Read Operator’s Manual before using.
• Place all controls in neutral, stop engine, set park
brake, remove ignition key and wait for all moving
parts to stop before servicing, adjusting, repairing
or unplugging.
• Install and secure all shields before operating.
• Keep hands, feet, hair and clothing away from
moving parts.
• Clear the area of bystanders, especially small
children, before starting.
• Chock tractor and machine wheels when operating.
• Stay away from overhead electrical wires when
adjusting auger and moving machine. Electrocution
can occur without direct contact.
• Attach securely to towing and power unit using
a pin with retainer and safety chain.
• Install extra lights or use pilot vehicles when
transporting during times of limited visibility.
• Use hazard flashers when transporting.
• Wear hearing protection for prolonged exposure
to excessive noise.
• Review safety instructions annually.
P1513104
Made in Canada
SAFETY INSTRUCTION
ROTOR INSPECTION
Inspection for rotor wear must be completed
upon first 40 hours of operation and every
40 hours after initial inspection. Refer to
operator’s manual for proper inspection
procedure.
P1513133
Made in Canada
To Next Page
Loading...