REMEHA Selecta - Optional Accessoiries

Remeha Selecta
14
3.4 Optional Accessoiries
- Kit No. 1 = 3-Way DHW diverting valve c/w wiring loom, immersion sensor and ½ “
BSP pocket (for system boiler only)
- Kit No. 2 = volt free relay for use with external mains voltage switching time clocks
(for system and combi boilers)
- Kit No. 3 = digital 7-day volt free switching time clock and harness for mounting in
the boiler (for combi boiler only)
- OpenTherm
®
fully modulating room controller = for room compensation based on
inside temperature (for combi boiler only)
- Outside sensor = for fully modulating weather compensation based on outside tem-
perature (for combi and system boilers with Kit No.1 fitted)
- Propane kit = conversion from natural gas to propane (for system and combi boil-
ers)
- Pipework cover plate = metal casing cover panel to hide bottom pipe connections
(for system and combi boilers)
- Mounting frame = allows first fixing of pipework without mounting the boiler (for sys-
tem and combi boilers)
- Cleaning tool = tool to clean the boiler heat exchanger (for system and combi
boilers)
- McAlpine condensate connector = allows connection from flexible condense pipe to
std overflow pipe (for system and combi boilers)
NOTE: Room controller and outside sensor cannot be used together.