REMEHA Selecta - 11.2.6 Checking for leakage (water, gas and flue gas side)

Remeha Selecta
56
11.2.6 Checking for leakage (water, gas and flue gas side)
Fig. 27 Checking pipework connections
pdf
- Isolate the electrical supply to the boiler.
- Remove the boiler front casing cover.
- Drop down the boiler instrument panel to completely reveal all the pipework connec-
tions.
- Visually examine the flue/water and combustion joints and repair as necessary.
- Examine all electrical connections and tighten or replace if necessary.
- Re-fit front casing cover replacing the gasket if it was damaged during removal.