REMEHA Selecta - Page 71

71
71 Grommet 22 mm Ø red flow pipe to bottom casing
72 Venturi assembly
73 Clip raymond 12267 for 4,2 mm Ø front cover screw x 2
74 Transformer CKZ050122517 24v
75 Grommet 15 mm Ø yellow gas pipe to bottom casing
76 Nut brass 1/2"x 7mm for plate heat X unions
77 Flow DHW limit device 10,0 ltr/min. for plate X DHW flow
78 Grommet 15 mm Ø black s/v discharge pipe to bottom casing
79 Grommet 22 mm Ø blue return pipe to bottom casing
80 Nut M 06 for front plate to heat exchanger x 9
81 Cable gland APG 11x 6 - 9 FS mains cable entry
82 Grommet Ø20 mm black cable entry
83 O ring 65 mm Ø x 3mm air inlet to fan
84 Bolt hex head M5 x 16 mm fan to venturi x 2
85 Gasket
25 mm o/d x 21mm I/d x 1,0 mm.
for plate heat X cold inlet union
86 Star washers for retaining grey plastic cover x 3
87 Bolt M6x16mm for inspection glass mounting frame
88 Washer spring ring 4mm o/d x 3mm I/d for Ign electrode mtg screws
Cover plate - not illustrated for pipework connections
Cable complete wiring harness
- not illustrated
Cable mains supply - not illustrated 230v - 3core flex c/w cable gland
Wall bracket for selecta - not illustrated
Table 15 Part list Selecta combi boiler