19 MAN-GD-2300-002
Drive System
Your Seeder uses standard # 40 roller chain throughout its drive system. The drive system is simple and
designed for low maintenance. Remlinger drills feature a spring-loaded floating drive wheel for 3 point or pull
type drills. This floating design allows the drive wheel to move up or down to follow the ground contour. The
floating action helps prevents seed skips in the roughest of fields. Spring pressure may have to be adjusted
depending on ground conditions.
• Check the drive idlers to ensure that they are taking up any “excess” chain slack.
• Check each chain to ensure that it is not over-tightened.
• Annually clean and lubricate chain with chain oil.
Hydraulics
Oil escaping from a very small hole can be almost invisible. Use a piece of cardboard or wood instead
of a hand to search for suspecting leaks. If injured by escaping oil, see a doctor at once. Serious infection or
reaction can develop if proper medical treatment is not administered immediately. Always relieve pressure in a
hydraulic system before working with hydraulic system components.
Caution
Caution: Escaping fluid under pressure can cause
serious injury and requires doctor's immediate
attention. Keep away from hydraulic system until
pressure is relieved.
Caution
Caution: Do not store the drill with hydraulic pressure
in the remote hydraulic cylinders.
To Next Page
Loading...