Remlinger 2300 - Warranty Policy

9 MAN-GD-2300-002
To the Owner
This manual contains important information about the safe assembly, adjustment, operation and
maintenance of your 2300 Grain Drill. The Drill and Optional Equipment have been fully assembled at the
factory when appropriate. The use of this manual describes how to complete any remaining assembly.
Additional diagrams may also be included for specific applications. Please contact your dealer or Remlinger
Manufacturing for any questions. 1-800-537-7370
Any unauthorized modification to any part of the Grain Drill or attachments could cause series injury
and void any warranty consideration. Please refer to the Warranty Policy referenced below. This manual
should be placed in the Owner’s Manual Canister on the implement to which it is attached. For additional
manuals or to replace a lost or damaged manual, please contact your dealer. The manual number is
referenced on the lower right-hand corner of each page.
Warranty Policy
Remlinger Mfg. will warrant all products against defects in material and workmanship manufactured and
sold by it. Warranty will only be granted after examination by appropriate personnel. This warranty is
expressly limited to the replacement of defective products. This warranty does not obligate Remlinger
Manufacturing to cover cost of labor to replace these parts.
Remlinger Mfg. reserves the right to change specifications, add improvements or discontinue
manufacture of any of its equipment without notice or obligation to purchasers of its equipment. This warranty
gives you specific legal rights. You may also have other rights which vary according to state or province.
WARRANTY EXCLUSIONS: Labor, transportation, or any cost related to a service call is not provided by
Remlinger Mfg. This Limited Warranty does not apply to damage resulting from misuse, neglect, normal wear,
accident or improper installation or maintenance.
BASIC WARRANTY: All Remlinger manufactured products are warranted for one year from date of purchase.
WARRANTY CERTIFICATION: Warranty registration should be mailed, emailed or faxed within 30 days of
purchase to certify warranty coverage.
UNAPPROVED PARTS OR MODIFICATION: All obligations of Remlinger Mfg. under this Warranty are
terminated if unapproved parts are used or if equipment is modified or altered in any way not approved by
Remlinger Mfg.