Remlinger 2300 User Manual

72 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Manual # - MAN-GD-2300-002

Grain Drill

Model 2300

Owner’s Manual

Installation and Parts Manual

Our Tradition is Quality Driven and Field Proven

Table of Contents

Questions and Answers:

E
elizabeth88Aug 3, 2025
Why is seed flow uneven to individual openers in my Remlinger 2300 Drill?
- M
  Monica KramerAug 3, 2025
  Uneven seed flow to individual openers in your Remlinger Drill can occur for several reasons. First, check each meter unit to ensure it's opening properly and adjust if necessary. Also, too much trash in the seed can cause this issue, so cleaning the seed is recommended. Make sure you have enough seed in the hoppers. Finally, a plugged seed tube or opener can also cause uneven flow; clear any obstructions you find.
D
Daniel CooperAug 17, 2025
What to do if Remlinger 2300 has uneven seed depth?
- G
  Gregory WrightAug 17, 2025
  If your Remlinger Drill isn't achieving an even seed depth or the opener fails to penetrate the soil, several factors could be at play. Start by checking the down pressure on the openers and adjust the down pressure spring for more pressure if needed. If the ground is too hard, prepare a deeper seed bed if you are using conventional methods, or add weight within recommended specifications if you are using no-till methods, or wait for necessary moisture. Also, excessive speed can pull the drill out of the ground, so reduce tractor speed. Check the press wheel height and raise it if it's set too low. Finally, ensure the drill is level from front to rear and reset it if necessary.

Remlinger 2300 Specifications

General

Brand	Remlinger
Model	2300
Category	Drill
Language	English

Summary

Introduction and General Information

Common Used Symbols

Explains various symbols used throughout the manual for clarity.

Warranty Policy

Outlines the terms and conditions of the product warranty.

General Safety Rules

Essential safety rules for operating the grain drill.

Transport Safety

Critical safety measures for transporting the grain drill on public roads.

Setup and Specifications

Assembly Required

Details assembly requirements for the pull-type and 3-point hitch configurations.

Specifications

Dimensional specifications for the 3-point and pull-type hitch models.

Row Spacing

Information on adjusting row spacing for different seeding needs.

Recommended Torque Specifications

Specifies torque values for various bolts and fasteners.

Operation and Maintenance

Operating Instructions

Overview of seeder operation and essential pre-operation checks.

Maintenance

Details lubrication points, schedule, and parking stand procedures.

Transporting

Safe practices and procedures for transporting the grain drill.

Drive System

Explanation of the drill's drive system components and function.

Start-up Procedure

Step-by-step guide for starting up and preparing the grain drill for use.

Adjustments, Calibration, and Seeding

Settings and Adjustments

Adjusting frame, seed tubes, coulters, and springs for optimal operation.

Field Operation Guide

Recommendations for ground prep, speed, and weight for effective drilling.

Seeding Adjustments

Adjusting seed rate by changing sprockets and meter settings.

Calibration Procedure

Step-by-step guide to accurately calibrate the drill's seeding rate.

Seed Charts

Reference tables for seed rates based on seed type and settings.

Native Grass Seeder Attachment

Calculating seeding rates and adjusting sprockets for native grass.

Parts Identification

Pull Type Hitch Parts

Illustrated parts list for the pull type hitch assembly.

Frame – Description

Detailed list of parts comprising the drill frame.

Hopper Assembly – Description

Detailed list of parts for the hopper assembly.

Drive Wheel – Description

Detailed list of parts for the drive wheel assembly.

Opener Assembly – Description

Detailed list of parts for the opener assembly.

Hydraulic Components – Pull Type Drill

Illustrated hydraulic components for pull-type drills.

Small Seed Meter Assembly

Illustrated parts list for the small seed meter assembly.

Large Seed Meter Assembly

Illustrated parts list for the large seed meter assembly.

Troubleshooting and Support

Trouble Shooting

Common problems and their solutions for the grain drill.

Registration Form

Form for registering the grain drill for warranty purposes.