4 MAN-GD-2300-002
This symbol indicates an important Safety Alert Message in
this Manual. Carefully read and understand the message
that follows. The potential for series injury or death is
possibly.
Warning
Before using this grain drill, make certain that every operator:
• Is instructed in safe and proper use of this drill.
• Reads and understands the manual pertaining to the drill.
• Reads and understands ALL (if applicable) Safety Decals on the drill.
• Clears the area of all other people before operating the drill and / or attachments.
• Learns and practices safe use of the drill and / or attachments in a safe clear open area before operating in
the field.
Safety Rules
• Never attempt to operate or adjust the drill without reading this manual.
• Do not attempt to adjust the drill while it is in motion.
• Caution is required when hooking up or un-hooking the drill. Parking stands have been provided to help
support the drill.
• Always use any transport locks that are provided on the drill or attachment.
• Always place all safety decals, SMV sign and reflectors in their proper locations. Clean and replace as
necessary.
• Never allow anyone to ride on the drill or attachments.
• Always slow down when turning and traveling over rough terrain.
• Always support the drill when mounting or working on the attachments.
• Hydraulic oil escaping under pressure can have sufficient force to penetrate the skin causing serious
personal injury.
• Before disconnecting lines be sure to relieve all pressure. Before applying pressure to the system, be sure
all connections are tight and that lines, pipes, and hoses are not damaged.
• Be careful around teeth, tines, sweeps, and blades: they get sharper with wear.
• Be careful walk board may be slippery when wet.
To Next Page
Loading...