3 MAN-GD-2300-002
Remlinger 2300 Grain Drill
Thank you for purchasing a Remlinger 2300 Grain Drill. The Remlinger 2300 was designed to be a
cost-effective way to accommodate a wide variety of applications. This design produces a machine with
enough strength and flexibility to carry you through your various seeding operations. Traditional seed
placement, pasture renovation, native grass plots and small seed cover crops to name a few.
The basic drill, with the large seed hopper only, can be used as a no-till drill in the traditional sense. It
is capable of drilling a wide variety of beans, peas, wheat and larger grass seed. This basic setup can also be
used to renovate existing pastures or create new pasture areas.
The addition of the native grass seed hopper gives your basic drill more flexibility. The hopper comes
standard with aggressive internal agitators to keep the fluffy seed from bridging and feeds them into saw-
toothed picker wheels. The picker wheel act as the seed meter. This hopper can be used to create native
grass plots for wild life, help prevent erosion and return un-useable farm ground back to its natural state.
Finally, a small seed hopper can be added to the basic drill setup. The small seed hopper allows you to
drill a wide variety of alfalfas, clovers, ryegrass and radishes. These seeds are normally used as a cover crop
providing nutrients, loosening of the soil and weed control.
The native grass and small seed hoppers can be used in any combination with the basic drill setup.
Each can be added at any time. The Remlinger 2300 Grain Drill is capable of performing a wide array of
applications across your farming operation. Try it out and we bet that you will agree.
Read and study the operator’s manual carefully to learn how to safely service and operate your
machine. Failure to do so could cause personal injury or equipment damage.
In addition to the equipment furnished with your drill, attachments are available to help you do a better
job. Right-Hand and Left-Hand sides are determined by facing in the direction the drill will travel when
in use.
For your convenience write model and serial number in area provided below. Serial number is located
on side end of tool bar.
Model Number:
Serial Number:
Date of Purchase:
To Next Page
Loading...