17B-17
PETROL INJECTION
Crankshaft position sensor: Removal - Refitting
K4M
17B
II - FINAL OPERATION
a Refit the engine undertray.
a Refit the engine cover.
a Apply the after repair procedure using the diagnos-
tic tool :
-Connect the diagnostic tool,
-select « injection computer » ,
-go to repair mode,
-display the « Before/After repair procedure » for
the computer selected,
-select « TDC sensor » in the « List of components
controlled by this computer » section,
-carry out the operations described in the « After re-
pair procedure » section.
TL4
JH3
To Next Page
Loading...
