Renishaw XL-80 - Mounting the Optics

Linear
XL-80 Hardware
XL-80 Applications
Angular
Straightness
XL80 laser system 111www.renishaw.com/xl80
Mounting the optics
Mounting the straightness reector
Assemble the straightness reector as
shown above�
Attach the target to the centre of the straightness
reector.
Mount to the stationary element of the machine
in the farthest position along the axis of travel�
Translate the straightness reector so that the
beam is on the centre of the white target�
Straightness
XL-80 Applications