Renishaw XL-80 - Straightness Base; Swivel Mirror; Fixed Turning Mirror; Adjustable Turning Mirror

19 XL80 laser system
Linear
XL-80 Hardware
XL-80 Applications
Angular
Straightness
www�renishaw�com/xl80
Swivel mirror
The swivel mirror is used to
deect the laser beam in the
vertical plane through the range
0 degrees to 135 degrees�
The swivel mirror can be used
in combination with linear,
angular or straightness optics
for measurements along
machine diagonals, or on
inclined axes� It can be
attached to the optics for fast,
easy set-up�
Fixed turning mirror
The xed turning mirror deects
the laser beam by a xed angle
of 90 degrees (to a tolerance of
±30 arc minutes)�
Like the swivel mirror, it can
be attached to the linear and
angular measurement optics
to help optical set-up and is
used mainly when access
to the required axis of
measurement is restricted�
Adjustable turning mirror
The adjustable turning mirror
is used for straightness
measurements along vertical
axes and can also be used
in some horizontal axis
measurements� The mirror
deects the linear beam by
a nominal 90 degrees�
Straightness base
The straightness base is used
as a mount for the straightness
reector and adjustable turning
mirror (or laser steerer with
xed turning mirror) for vertical
straightness measurements�
XL-80 Hardware