Maintenance
130
Doc No: UMAN\FL\0110
Rev. No.: 1.02B
Item Check Criteria
Programming tool Check that the functions of the Monitoring and other operations
programming tool are normal. are available.
Check that the connector and cable Not damaged
are not damaged.
User program Check that the T1/T1S program No compare error
and the master program (saved on a
floppy disk, etc.) are the same.
9.4 Spare Parts
To recover from trouble quickly, it is recommended to keep the following spare parts:
Item Quantity Remarks
FlexiLogics basic unit 1 Maintain at least one to minimize the down-time
of the controlled system.
Programming tool 1 Useful for the troubleshooting procedure.
Master program As required Saved on a CD or USB stick, etc.
Expansion rack or 1
unit (if any)
I/O module (if any) One of each type used
These spare parts should not be stored in high temperature and/or humidity locations.
To Previous Page
Loading...
