Introduction
8
Doc No: UMAN\FL\0110
Rev. No.: 1.02B
1.1 Purpose of this manual
Thank you for purchasing FlexiLogics Series Products from Renu Electronics. FlexiLogics Series Products are
versatile high-performance programmable controllers with Microsoft® Windows based configuration Software.
This Manual explains the operation of the FlexiLogics Series and how to implement available features using the
FlexiSoft Software. This manual will help you to install, configure and operate your FlexiLogics product.
1.1.1 FlexiLogics Basics
FlexiLogics provide much more versatility than traditional programmable controllers. FlexiLogics unit supports basic
relay ladder functions. In addition to this it provides functions such as data operations, arithmatic operations, various
functions etc. Furthermore, its high speed counter functions, pulse output functions, and data communication
functions allow its application to a wide scope of control systems.
What is a Project?
A project is an user created application in FlexiSoft Software. A project contains information such as FlexiLogics
model, Network Configuration, ladder information, etc.
What is a Ladder?
You use Ladder Logic to write your project application. Ladder is based on Boolean principals. Ladder Diagrams are
composed of different types of contact, coil and function block elements. These elements are placed in nets.
In any Ladder Diagram, the contacts represent input conditions. They lead power from the left rail to the right
rail. Coils represent output instructions. In order for output coils to be activated, the logical state of the contacts
must allow the power to flow through the net to the coil.
To Next Page
Loading...