Hardware
51
Doc No: UMAN\FL\0110
Rev. No.: 1.02B
CAUTION
1. Turn off power before wiring to minimize the risk of electrical shock.
2. Exposed conductive parts of wire can cause electrical shock. Use crimp-style terminals
with insulating sheath or insulating tape to cover the conductive parts. Also close the
terminal covers securely on the terminal blocks when wiring has been completed.
3. Operation without grounding may cause electrical shock or malfunction. Connect the
ground terminal on the FlexiLogics to the system ground.
4. Applying excess power voltage to the FlexiLogics can cause explosion or fire. Apply power
of the specified ratings described in the manual.
5. Improper wiring can cause fire, electrical shock or malfunction. Observe local regulations on
wiring and grounding.
Wiring:
To Next Page
Loading...
