Chapter 2
2-4 BiPAP Focus Ventilator Service Manual © Respironics, Inc. REF 1029568 Rev B
Warnings and Cautions
2.3 Notes • Refer to the BiPAP Focus Operator’s Manual for product use,
additional warnings, cautions, and notes.
• Service calibration procedures require a printer to be assigned to
the service PC: this can be an internal print location (for example,
using Adobe PDF) or a printer connected to the PC. If a print error
occurs at the end of the calibration, the calibration table is
cleared and the calibration must be repeated.
To Next Page
Loading...
