Page 40 of 80
© Retrotec 2022
standards and creates secure compliance reports that can be shared immediately and viewed from
anywhere.
rCloud allows anyone with a mobile device to perform a fully automated blower door or duct test. The
rCloud app provides secure and accurate data that includes the location where the test was performed,
local weather, set-up conditions, photos and the calibration date of the gauge. In some markets, rCloud
will provide existing housing data.
Simply setup your equipment and open the rCloud app on the DM32X. Visit
https://retrotec.com/rcloud.html
for full information on how to use rCloud.
To Next Page
Loading...
