REYMSA COOLING TOWERS, INC.
www.reymsa.com
The
All-Fiberglass
Cooling Towers
19
A.2.8. OPTIONAL ACCESSORIES
A.2.8.1. ACCESSORIES - SAFETY
REYMSA offers a variety of optional accessories to help ensure the safety of the personnel operating the
Closed Circuit Fluid Cooler, like ladder, catwalk, handrail, and davit support, hoist, and trolley (See Figure
A-42). These accessories are designed for easy assembly with labeling on the point of contact and the part
being installed (See gure A-42).
Following is a general procedure for installation; each tower will be provided with specic instructions for
that particular tower. Assembly Instructions and drawings are issued with every Closed Circuit Fluid Cooler.
General installation instructions:
1. The accessories are composed of several parts.
2. Components and parts are labeled with stickers for identication in the tower.
3. Every section should be jointed with stainless steel or galvanized steel bolts, washer and nuts, in
accordance to the material of construction of the accessory (supplied by REYMSA).
4. Do not mix the different sections to avoid assembly problems.
Installation
Figure A-42: Optional accessories by REYMSA
To Next Page