Ricoh Aficio 1060 - 2 Copying; Basic Procedure

17
2. Copying
Basic Procedure
A
AA
A
When the machine is set for user
codes, enter a user code (up to 8
digits) with the number keys, and
then press the {
{{
{#}
}}
} key.
The machine is ready to copy.
Reference
For Users Code, see ⇒“Key Op-
erator Tools” in the General Set-
tings Guide.
B
BB
B
Make sure "Ready" is displayed
on the screen.
If any other function is displayed,
press the {
{{
{Copy}
}}
} key.
❖
❖❖
❖
Initial copy display
C
CC
C
Make sure there are no previous
settings remaining.
Note
❒ When there are previous set-
tings remaining, press the {
{{
{Re-
set}
}}
} key and enter again.
D
DD
D
Place originals.
Reference
⇒ p.12 “Placing Originals”
E
EE
E
Set desired settings.
Reference
Please refer to each functions.
F
FF
F
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum copy quantity
that can be set is 999.
G
GG
G
Press the {
{{
{Start}
}}
} key.
The machine starts copying.
Note
❒ When you place originals on the
exposure glass, press the {
{{
{#}
}}
}
key after all originals are
scanned.
❒ Copies are delivered face down.
-
--
-How to Operate
❖
❖❖
❖
To stop the machine during a multi-
copy run.
⇒Press the {
{{
{Clear/Stop}
}}
} key.
❖
❖❖
❖
To return the machine to the initial
condition after copying.
⇒Press the {
{{
{Clear Modes}
}}
} key.
❖
❖❖
❖
When clearing entered values.
⇒Press the {
{{
{Clear/Stop}
}}
} key or the
[Clear] key on the display.
❖
❖❖
❖
To confirm settings.
⇒Press the {
{{
{Check Modes}
}}
} key.
MartiniC1_GBcopy4_FM.book Page 17 Tuesday, April 23, 2002 6:23 PM