Configuring the Network Interface Board with a Web Browser
91
7
Going to the Top Page
After launching the Web Browser, type the IP address of the machine. See the
example below. This example is for the English version.
http://192.168.15.16/
(In this example, the IP address of the Network Interface Board is 192.168.15.16.)
Note
❒ If a DNS server is used on the network, you can type the host name as a URL.
For example, http://webmonitor.netprinter.com/. In order to do this, you
must register the IP address and the host name of the Network Interface
Board with the DNS server. Consult the network administrator for informa-
tion about how to do this.
❒ Make sure to set the appropriate proxy server settings in the Web Browser
you are using. Otherwise you may not be able to connect to the local network
printer. Consult the network administrator for information about how to set
the proxy server.
1. Header Buttons
You can register favorite URLs with
[URL]. To view the Help section, click
[Help].
Important
❒
When connecting via a dial-up con-
nection, please be aware that there
will be a communication charge as
you are logging onto the Internet.
Note
❒ The Help files are stored on the CD-
ROM labeled “Operating Instruc-
tions” in HTML format.
2. Menu Buttons
These Buttons are to configure the Net-
work Interface Board and for checking
the status of the machine.
Note
❒ When you click [Configuration], a dia-
log box appears requesting the user
name and password. Type only the
password in this dialog box. The de-
fault password is “password”.
❒ The password is the same as that used
for remote maintenance and that used
in the NIB Setup Tool. If you change a
password with the Web Browser, the
other passwords are also changed.
3. Status
Displays the name and comments of the
Network Interface Board, and the printer
status.
3
1
To Next Page
Loading...
