29
4. Troubleshooting
Error & Status Messages on the Display
Panel
❖
❖❖
❖ Status Messages
Messages/Second messages Status
Hex Dump Mode The machine receives data in hexadecimal numbers in the Hex
Dump mode. Turn off the machine after printing, and then
turn back on.
Offline The machine is offline. Set the machine online by pressing [On-
line] on the display panel to start printing.
Please Wait The machine is initializing the development unit. Wait for a
while.
Printing... The machine is printing. Wait for a while.
Ready The default ready message. The machine is ready for use. No
action is required.
Resetting Job... The machine is resetting the print job. Wait until “Ready” ap-
pears on the display panel.
Waiting... The machine is waiting for the next data to print. Wait for a
while.
To Next Page
Loading...
