Ricoh Aficio 1060 - Initializing the Hard Disk; Page Setup; Printing the Font Catalog

Printer Utility for Mac
24
2
Initializing the Hard Disk
When initializing the machine's hard disk, all the fonts downloaded to the ma-
chine's hard disk drive are deleted. Before initializing, be sure to check the fonts
on the hard disk drive.
Important
❒ When initializing the machine's hard disk drive from the control panel, all of
the data on the machine's optional hard disk drive, including other areas that
do not use PostScript 3, are deleted. Before initializing, be sure to check the
data on the optional hard disk kit.
A
AA
A
Select [Initialize Printer's Disk...] on the [File] menu.
The confirmation message appears.
Note
❒ To cancel initialization, click [Cancel].
B
BB
B
Click [Execute].
Initializing starts.
Important
❒ Do not turn off the power switch until initializing is completed, otherwise
the hard disk drive may get damaged.
C
CC
C
When the completion message appears, click [OK].
Page Setup
You can set the paper size on which to print “Print Fonts Catalogue” and “Print
Fonts Sample”.
A
AA
A
Select [Page Setup...] on the [File] menu.
B
BB
B
Choose the paper size.
Printing the Font Catalog
You can print the names of fonts available on the machine.
Note
❒ The paper selected under [Page Setup] is used.
A
AA
A
Select [Print Fonts Catalogue] on the [File] menu.
B
BB
B
Click [Print].