Covers
65
6
Covers
Using this function, you can insert cover and back sheets, feeding from a differ-
ent tray from that of the paper for the body, and print on them as well.
Reference
For printing methods, see the printer driver's Help.
Limitation
❒ To use this function, Collate must be set. Rotating Collate cannot be set.
Note
❒ The cover sheets should be the same size and orientation as the body of the
paper.
❒ If “Auto Tray Select” has been set as the paper feed tray for the body paper,
the paper will be delivered from a tray containing paper in K orientation.
Therefore, when the cover paper has been set to L orientation, the orienta-
tion of the output cover paper and body paper will be different.
❒ The cover sheets will not be printed when the sheet for the cover page is fed
from the optional interposer.
• For information about setting paper when using the optional interposer,
see “Loading Paper in the Interposer”, General Settings Guide.
❖
❖❖
❖ Cover sheet
Prints the first page of the document on the sheet for the cover page.
• Print on one side
Prints on one side of the cover sheet only, even when duplex printing is se-
lected.
• Print on both sides
Prints on both sides of the cover sheet when duplex printing is selected.
GCPY016E
4
4
GCPY030E
2
1
3
4
1
2
3
4
To Next Page
Loading...
