Using the IEEE 802.11b (Wireless LAN)
101
7
Using the IEEE 802.11b (Wireless LAN)
Preparation
Make sure to configure the IP address and Subnet mask of this machine. To
make settings from the control panel of this machine, see the General Settings
Guide.
Use the WiFi authorized card for an access point and the IEEE 802.11b card in
the computer.
Setting IEEE 802.11b (Wireless LAN)
Note
❒ When using Windows XP standard Driver or Utilities to communicate with
Windows XP wireless LAN clients, select “802.11 ad hoc mode”.
To Next Page
Loading...
