Original Orientation and Scan Area Setting
47
3
Original Orientation and Scan Area Setting
To correctly display the top/bottom
orientation of the scanned original on
a computer, original orientation and
page flow must be set when placing
the original.
When using the network delivery
scanner and document server, set-
tings are made on the control panel of
the machine. When using the ma-
chine as a network TWAIN scanner,
settings are made on the TWAIN
driver.
Note
❒ The difference between scanning
with the TWAIN scanner and the
network delivery scanner/e-mail
is shown in the following table.
For a Network Delivery
Scanner and Document Server
A
AA
A
On the scanner function screen,
press [Original Settings].
B
BB
B
Make settings for original orien-
tation, 1 sided/2 sided combina-
tion, and mixed original sizes.
Note
❒ The initial values can be
changed under [Original Setting],
[Original Orientation Priority], or
[Mixed Original Sizes Priority] in
the Scanner Initial Setup. ⇒
p.25 “Making Scanner Settings”
TWAIN
Scanner
Network
Delivery
Scanner/E-
mail
Auto Detect
Non-Mixed
Original
Sizes
A whole
batch of
originals is
scanned us-
ing the size
of the first
original.
A whole
batch of
originals is
scanned us-
ing the max.
size set for
the ADF.
Auto Detect
Mixed
Original
Sizes
Auto detec-
tion is used
to deter-
mine the
size of each
original.
Auto detec-
tion is used
to deter-
mine the
size of each
original
placed on
the expo-
sure glass.
Size Specifi-
cation
When an
original is
smaller than
the speci-
fied size, a
margin ap-
pears.
When an
original is
smaller than
the speci-
fied size, a
margin ap-
pears.
To Next Page
Loading...
