Basic Procedure
21
2
Important
❒ When you set tab stock, be sure to
use the optional tab sheet fence.
❒ Set tab stock so that it will be fed
from the side without the tab first.
❒ Adjust the back fence position so
that the tab sheet fence will fit the
tab stock.
Note
❒ Check the position of the index tab
to avoid cropping the image.
❒ Set the tab stock with the side to be
copied facing down.
❒ Tab stock is always fed starting
from the top tab.
1.
Originals
2.
Tab stock
3.
Copies
A
AA
A
Select the paper tray where the
tab sock is set.
B
BB
B
Place originals, and then press the
{
{{
{Start}
}}
} key.
1
2
3
MartiniC1_GBcopy4_FM.book Page 21 Tuesday, April 23, 2002 6:23 PM
To Next Page
Loading...
