Installing the Printer Driver and Software
50
2
❖
❖❖
❖ If [Found New Hardware Wizard] appears every time you restart the computer with
an operating system that does not support IP over 1394 or plug in/take out the cable,
disable the device with the following procedure.
• Windows 2000
A
In [Found New Hardware Wizard] dialog box, click [Next].
B
When the [This wizard will complete the installation for this Device:] message
and “IP over 1394” appear, select [Search for a suitable driver for my device
[recommended]], and then click [Next].
C
When the [Locate Driver Files] message appears, remove all the selections
from [Optional search locations.], and then click [Next].
D
When the [Driver Files Search Results] message appears, select the [Disable
the device. The Add/Remove Hardware Wizard in the Control Panel can be able to
complete the driver installations.] check box, and then click [Finish].
To Next Page
Loading...
