Error & Status Messages on the Display Panel
33
4
machine configuration
Note
❒ “*” (asterisk) is displayed with the current setting.
❒ Regarding *1–*5, see table below.
❖
❖❖
❖ *1 Input Tray: Name
Full: Finisher Shift Tray 1,2 Shift tray 1 and 2 are full with the Auto Tray
Output function.
Paper on Finisher Shift Tray 1,2 Paper on the finisher shift tray 1 or 2 without
the Auto Tray Select function.
Cover Open: Front Cover Front cover is open.
Cover Open: Finisher Finisher cover is open.
Cover Open: Mailbox Right cover on the mailbox is open.
Not Detected: B2 Lever B2 lever is not correctly set.
Paper Misfeed: Input Tray Paper misfeed in paper feed area
Paper Misfeed: Internal/Output Paper misfeed inside machine or in output
tray area
Paper Misfeed: Finisher Paper misfeed inside finisher
Paper Misfeed: Mailbox Paper misfeed inside mailbox
Paper Misfeed: Interposer Paper misfeed inside interposer.
Call Service Center An error has occurred.
Item Description
Input Tray
No.
Name
PaperSize
Status
ID number of the paper tray
Name of the paper tray
*1
Paper size loaded in the paper tray
*2
Current status of the paper tray
*3
Output Tray
No.
Name
Status
ID number of the output tray
Name of the output tray
*4
Current status of the output tray
*5
Name Description
Tray X Name of installed paper tray (X is the number
of tray.)
LCT Large Capacity Tray (LCT)
Bypass Tray Bypass tray
Status Description
To Next Page
Loading...
