Printer Features Parameters
49
5
Duplex You can select whether you want to print on both sides of each
page.
• Off
• Short Edge Bind
• Long Edge Bind
Note
❒ Default: Off
Edge Smoothing You can set whether or not to enable “Edge Smoothing”.
• On
• Off
Note
❒ Default: On
❒ If “Toner Saving” is set to “On”, “Edge Smoothing” is ignored
even if it is set to “On”.
Spool Image You can set whether or not to spool printing data.
When set to “On”, all the data from the computer will be stored as
images in a folder in the hard disk , and then printing will start.
This shortens printing time.
• On
• Off
Note
❒ Default: Off
Resolution You can set the print resolution in dots per inch.
❖
❖❖
❖ PCL
300 dpi, 600 dpi
❖
❖❖
❖ PS
300 dpi, 600 dpi, 1200 dpi
Note
❒ Default: 600 dpi
❒ “PS” can be selected only when the optional PostScript 3 board
is installed in the machine.
Toner Saving You can select whether or not to enable “Toner Saving”.
• Off
• On
Note
❒ Default: Off
Menu Description
To Next Page
Loading...
