Appendix
68
6
• Print on front side only
Prints on the front side of the chapter slip sheets even if duplex printing is
selected.
• Blank
Note
❒ The slip sheet should be the same size and orientation as the body of the
paper.
❒ If “Auto Tray Select” has been set as the paper feed tray for the body paper,
the paper will be delivered from a tray containing paper in K orientation.
Therefore, when the cover paper has been set to L orientation, the orien-
tation of the output cover paper and body paper will be different.
❒ The same paper feed tray cannot be set for the body of the document and
the slip sheet.
❒ Slip sheets cannot be printed on when paper is fed from the optional inter-
poser.
• For information about setting paper when using the optional interposer,
see “Loading Paper in the Interposer”, General Settings Guide.
GCPY032E
9
8
7
4
6
2
1
3
5
10
GCPY027E
To Next Page
Loading...
