Transmission
102
1
J Enter a SUB Code, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
K When a password is required, press [Password (SID)], enter the password
with the number keys, and then press [OK].
L Press [OK].
M Press the {Start} key.
If you use Immediate Transmission and the fax machine at the destination
does not support the SUB Code function, a message will appear on the display
to inform you of this. When this happens, press [Exit] to cancel the transmission.
Note
❒ Make sure the number of digits in the SUB Code matches the specification
of the machine to which you are sending. For the maximum number of dig-
its for the SUB Code of this machine, see “Maximum Values”.
❒ You can store SUB Codes as well as names and fax numbers in the destina-
tion list and Keystroke Programs.
❒ When a SUB Code is stored in the destination list, the SUB Code can be
modified or deleted after selecting a destination using the Destination
keys.
❒ The SUB Code is printed on lists and reports.
Reference
p.135 “SUB Code Transmission”
p.152 “Transferring Received Documents”
p.262 “Registering and Changing Keystroke Programs”
p.272 “Maximum Values”
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide
To Next Page
Loading...
Need help?
General
