Ricoh Aficio C3000 User Manual

Viewing Fax Information Using a Web Browser
259
6
To add new receiver
Follow these steps to use Web Image Monitor to add a new destination to the
Address Book.
A Start the Web browser.
B Enter the IPv4 address of the machine you want to monitor after “http://” in
the address field.
The top screen is displayed.
C Click [Login], and then enter the Administrator's name and password.
D Click [Address Book] in the left pane.
The Address Book is displayed.
E Click [Add User].
The [Add User] page appears.
F Enter the registration number, name, and e-mail address, then set the nec-
essary properties.
You can set the Internet Fax data format after entering the e-mail address.
G Click [Full Mode] under [Internet Fax Data Format], and set the properties ac-
cording to the receiver's properties.
If you change the mode to “Simple Mode”, you cannot set machine properties.
H Click [OK] in the upper-left of the screen.
To cancel the setting, click [Cancel] in the upper-left of the screen.
The Address Book is displayed.
I Close the Web browser.

Ricoh Aficio C3000 Specifications

General

Technology	Laser
Color Output	Color
Max Printing Resolution	1200 x 1200 dpi
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Duplex Printing	Yes
Max Paper Size	A3
Standard Paper Capacity	1, 200 sheets
Standard Memory	512 MB
Maximum Memory	1 GB
Hard Drive Capacity	80 GB
Type	Multifunction Printer
Function	Print, Copy, Scan, Fax
Compatibility	Windows, Mac
Warm-up Time	Less than 60 seconds
First Print Out Time (Black)	Less than 10 seconds