Ricoh Aficio C3000 User Manual

Transmission Options
135
2
SUB Code Transmission
Enable this function to perform SUB Code Transmission.
Important
❒ This function is not available with Internet Fax.
❒ To perform SUB Code Transmission, a SUB Code must be set in [Adv.Features],
the Address Book, or Keystroke Programs in advance. Even though “SUB
Code Transmission” is set to on, if the SUB Code is not appended to the spec-
ified destination, transmission is in standard fax mode.
❒ When you select a destination that has a registered SUB Code from the Ad-
dress Book, if “SUB Code Transmission” is set to off, the SUB Code is not ap-
pended and transmission is in standard fax mode.
A Place the original, and then select the scan settings you require.
B Press [TX Mode].
C Select [Option Setting].
D Press [SUB Code Transmission] to highlight it.
To cancel a SUB Code Transmission, press [SUB Code Transmission] again.
E Press [OK] twice.
F Specify the destination, and then press the {Start} key.

Ricoh Aficio C3000 Specifications

General

Technology	Laser
Color Output	Color
Max Printing Resolution	1200 x 1200 dpi
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Duplex Printing	Yes
Max Paper Size	A3
Standard Paper Capacity	1, 200 sheets
Standard Memory	512 MB
Maximum Memory	1 GB
Hard Drive Capacity	80 GB
Type	Multifunction Printer
Function	Print, Copy, Scan, Fax
Compatibility	Windows, Mac
Warm-up Time	Less than 60 seconds
First Print Out Time (Black)	Less than 10 seconds