Ricoh Aficio C3000 User Manual

Transmission
80
1
Searching for a Destination in the Address
Book
Use this function to search for a destination registered in the destination list or
on the LDAP server.
Important
❒ To search for a destination from an LDAP server, the LDAP server must be
registered in advance. For details about registering LDAP servers, see “Sys-
tem Settings”, General Settings Guide.
Note
❒ Press [Fax] or [Internet Fax] on the Search Destination screen to switch the
transmission type between fax/IP-Fax and Internet Fax.
❒ The search returns only destinations that partially match the entered name.
❒ A warning message appears if the search returns more than the maximum
number of destinations you can search for at a time. Press [Exit] and change
the destination name to view fewer destinations.
❒ Although one user can program multiple e-mail addresses, only one address
can be retrieved by the search. The address retrieved by the search depends
on the searching method supported by the LDAP server. However, the ad-
dress programmed first is normally retrieved.
Reference
p.272 “Maximum Values”
“System Settings”, General Settings Guide

Ricoh Aficio C3000 Specifications

General

Technology	Laser
Color Output	Color
Max Printing Resolution	1200 x 1200 dpi
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Duplex Printing	Yes
Max Paper Size	A3
Standard Paper Capacity	1, 200 sheets
Standard Memory	512 MB
Maximum Memory	1 GB
Hard Drive Capacity	80 GB
Type	Multifunction Printer
Function	Print, Copy, Scan, Fax
Compatibility	Windows, Mac
Warm-up Time	Less than 60 seconds
First Print Out Time (Black)	Less than 10 seconds