EasyManuals Logo

Ricoh Aficio C3000 User Manual

Ricoh Aficio C3000
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #179 background imageLoading...
Page #179 background image
169
4. Changing/Confirming
Communication Information
This section explains the features of [Change TX / Info], which you can use to con-
firm communication results on the screen or printed reports.
Changing the Settings of Files in Memory
After you have pressed the {Start} key (after scanning originals), you can check
and edit the destination or settings of Memory Transmission. You can also can-
cel a transmission, change the settings of a transmission, print a stored file, print
a list of stored files, and resend a file which the machine failed to transmit.
Note
If the “No transmission files found.” message appears on the screen af-
ter you press [Check / Stop Transmission File], no files are being stored or sent
by Memory Transmission.
You cannot check or edit a file being sent. Also a SUB Code Transmission file
or stored file to be printed as a report cannot be checked or edited.
There are cases when a destination may not be selected as the destination ap-
pears as “p”, depending on the security settings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio C3000 and is the answer not in the manual?

Ricoh Aficio C3000 Specifications

General IconGeneral
TechnologyLaser
Color OutputColor
Max Printing Resolution1200 x 1200 dpi
Print Speed (Black)30 ppm
Print Speed (Color)30 ppm
Duplex PrintingYes
Max Paper SizeA3
Standard Paper Capacity1, 200 sheets
Standard Memory512 MB
Maximum Memory1 GB
Hard Drive Capacity80 GB
TypeMultifunction Printer
FunctionPrint, Copy, Scan, Fax
CompatibilityWindows, Mac
Warm-up TimeLess than 60 seconds
First Print Out Time (Black)Less than 10 seconds

Related product manuals