System Settings
22
2
C Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
D Select [Program/Change User Code] using {U} or {T}, and then press the {OK}
key.
E Select [Change] using {U} or {T}, and then press the {OK} key.
F Enter the registered user code you want to change using the number keys,
and then press the {OK} or {q} key.
When you select the user code from the User Code List, press [List]. Select the
user code you want to change using {U} or {T}, and then press the {OK} key
twice.
G Enter the new user code using the number keys, and then press the {OK} or
{q} key.
The “
Programmed” message appears, and then the “ User Code ” display re-
turns.
H Press the {User Tools/Counter} key.
Note
❒ Even if you change a user code, the counter value will not be cleared.
To Next Page
Loading...
