Adding Paper, Toner and Staples
88
7
Loading Paper into the Paper Trays
This procedure explains how to load paper into the paper trays.
A Make sure the paper tray is not in use.
B Pull the paper tray out slowly until it stops.
C While pinching the release lever, slide the end fence outward.
D Square the paper and place it in the tray.
Do not stack paper over the limit mark.
E Position the end fence flush against the paper.
F Push the paper tray in until it stops.
Note
❒ Fan the paper before loading.
❒ For details about loading paper of a size not selectable with User Tools in
Paper Trays, see “Changing the Paper Size”.
Reference
p.92 “Changing the Paper Size”
AYP001S
AYP002S
To Next Page
Loading...
