Getting Started
18
1
Control Panel
This section introduces the names and functions of the components on the con-
trol panel.
❖ For machines with the DDST Unit installed
❖ For machines with fax and printer/scanner installed
1. Communicating indicator
Lights during data transmission or reception.
2. {On Hook Dial} key (facsimile
mode)
Press this to hear dial and data tones on
the fax line while dialing, as if the hand-
set were off the hook. For details, see “On
Hook Dial”, Facsimile Reference.
3. Receive File indicator (facsimile
mode)
Remains lit when fax memory receives a
file. Flashes for Memory Lock files.
See “Substitute Reception”, Facsimile
Reference.
4. {Pause/Redial} key (facsimile
mode)
•Pause
Press to insert a pause in a fax dialing
sequence. You cannot insert a pause at
the beginning of a sequence. The pause
is indicated by “-”. For details, see “En-
tering a pause”, Facsimile Reference.
• Redial
Press this to select a recently-dialed
destination. For details, see “Redial”,
Facsimile Reference.
5. {Search Destination} key (scanner
and facsimile mode)
Press to search for a destination regis-
tered in the destination list.
6. {Check Destination} key (scanner
and facsimile mode)
Press to check the specified destination.
BAN023S
BAN024S
To Next Page
Loading...
