Configuring the Network Interface Board Using a Web Browser
11
3
Configuring the Network Interface Board
Using a Web Browser
A Start the Web browser.
B Enter the machine's IP address in the [Address] box, using the following for-
mat: http://XXX.XXX.XXX.XXX (Replace XXX with the appropriate num-
bers.)
The Web browser identifies the machine by its IP address, and then displays
the status of that machine.
C In the menu area, select the setting you want to change, and then configure
it as necessary.
Note
❒ Enter a password if necessary.
❒ Default password is "sysadm".
To Next Page
Loading...
