When You Cannot Send Scanned Files
59
5
Operations Are Not Possible When Messages Appear
This section describes likely causes of and possible solutions for messages that
appear when the machine fails to operate.
Message Cause Solution
Updating desti-
nation list. Re-
select
destination(s)
or sender's name
later.
The destination list is being up-
dated from the network using
SmartDeviceMonitor for Admin
or Web Image Monitor.
Wait until the message disap-
pears. Do not switch off the pow-
er while this message is
displayed. Depending on the
number of destinations to be up-
dated, there may be some delay
before you can resume operation.
Operations are not possible while
this message is displayed.
To Next Page
Loading...
