Using the Printer Function
42
1
Staple
With the optional Finisher SR3010 sets can be stapled individually when print-
ing multiple sets.
Staple Position
The specified staple position varies depending on paper size, type, quantity and
feed orientation. The following table shows staple positions:
Note
❒ Stapling might not be in the specified position if combine (layout) and duplex
printing are both selected. After setting the staple position, use the printer
driver's preview icon to check the position before printing.
Reference
For paper sizes and maximum numbers of sheets available for stapling, see
“Specifications for Options”, About This Machine.
For printing methods, see the printer driver Help.
AYM001S
To Next Page
Loading...
