Ricoh Aficio MP 2500 - Changing a User Code

User Code
21
2
E Select [Program] using {U} or {T}, and then press the {OK} key.
F Enter the user code using the number keys, and then press the {OK} or {q}
key.
The “
Programmed ” message appears, and then the “ User Code ” display re-
turns.
G Press the {User Tools/Counter} key.
Changing a User Code
This section describes how to change a user code.
A Press the {User Tools/Counter} key.
B Select [System Settings] using {U} or {T}, and then press the {OK} key.
APE028S