Copying
38
2
Preset Reduce/Enlarge
You can select a preset reduce or enlarge ratio for copying.
❖ Base Point
The base point of Reduce/Enlarge differs depending on how the original is
scanned. When the original is set on the exposure glass, the upper left corner
will be the base point. When it is set in the ARDF, the upper right corner of
the original will be the base point.
The figure below is the resulting copy images that differ depending on how
the original is scanned.
1 Base point when placing on the exposure glass
2 Base point when placing in the ARDF
AZB016S
To Next Page
Loading...
